About Gesonchiller

This author has not yet filled in any details.
So far Gesonchiller has created 230 blog entries.

Compressor overheating error and low valve temperature error

Compressor overheating error and low valve temperature error. Compressor overheating error The thermistor is embedded in the compressor motor winding, and the resistance is generally 1kΩ. When the winding is overheated, the resistance value will increase rapidly. When it exceeds 141kΩ, the thermal protection module SSM will [...]

2023-07-13T14:08:21+00:00Maintenance and Service Tips|Comments Off on Compressor overheating error and low valve temperature error

How to solve the common erros in the operation of chillers?(二)

How to solve the common erros in the operation of chillers?(二)   How to solve the common erros in the operation of chillers? Industrial chillers will always wear out during use. Therefore, we need to record and analyze its operating parameters on a regular basis, listen to [...]

2023-07-13T14:08:32+00:00Maintenance and Service Tips|Comments Off on How to solve the common erros in the operation of chillers?(二)

Attention of integrated water-cooled chiller system and operation

Attention of integrated water-cooled chiller system and operation Many people in the industry have come into contact with integrated water-cooled chillers, so they are not unfamiliar with it. However, many people still do n’t know much about integrated water-cooled chillers. If you do n’t know it, let [...]

2023-07-13T14:09:07+00:00Maintenance and Service Tips|Comments Off on Attention of integrated water-cooled chiller system and operation

How to choose a suitable chiller for injection molding machine

How to choose a suitable chiller for injection molding machine In the process of production, the injection molding machine needs to cool the mold to cool the plastic quickly, improve product quality, and improve production efficiency. Here, the supplement of the cold water machine is indispensable. The [...]

2023-07-13T14:09:19+00:00Industrial Chiller Applications|Comments Off on How to choose a suitable chiller for injection molding machine

The advantages of modular chillers and absorption chillers

The advantages of modular chillers and absorption chillers Modular chiller Advantage: It is an improved type of piston chiller and screw chiller. It is composed of multiple chiller units. The unit has small size, light weight, low height and small footprint. Simple installation, no need to reserve [...]

2023-07-13T14:09:38+00:00Comparisons and Selection Guide|Comments Off on The advantages of modular chillers and absorption chillers

Why is the chiller not cooling?

Why is the chiller not cooling? Industrial chillers will inevitably have large and small faults in the daily operation process, and general faults will have alarm prompts. But some will not alarm, so how to determine and eliminate the fault? Today, let me briefly talk about the [...]

2023-07-13T14:09:49+00:00Maintenance and Service Tips|Comments Off on Why is the chiller not cooling?

Water Source Heat Pumps: How They Work, Advantages & System Guide

A water source heat pump (WSHP) is a heating and cooling system that exchanges heat with a stable water source — groundwater, a lake, a river, or a closed-loop ground loop — rather than with outdoor air. Because water temperatures remain relatively stable year-round (typically 10–18°C for [...]

2026-04-10T02:03:36+00:00Comparisons and Selection Guide|Comments Off on Water Source Heat Pumps: How They Work, Advantages & System Guide

Industrial Chiller Installation Precautions

Industrial Chiller Installation Precautions With the continuous improvement of domestic industrial production capacity, industrial chillers are increasingly favored by enterprises. However, during the installation of industrial chillers, some installation problems are often encountered. So how do we properly install industrial chillers? The industrial chiller installation method and [...]

2023-07-13T14:10:12+00:00Maintenance and Service Tips|Comments Off on Industrial Chiller Installation Precautions
Go to Top