Swimming Pool Chillers, Pool Chiller Cooler | GESON Chiller
A swimming pool is a valuable addition to your backyard. It adds value to your home because it provides a wonderful recreation facility for the entire family. The ideal time to enjoy the swimming pool is during the summer when it is hot and you want to soak in the water to cool off. However, the heat from the ambient temperature during the summer months can make the pool water warm. For this reason, it is important to find ways to cool the pool water so that you can enjoy swimming in it and to be able to cool off to relax. A swimming pool chiller is an ideal solution in this case.
The outdoor swimming pool is affected by solar radiation,
The pool water temperature will rise,
This is because the heat absorption area of the swimming pool is relatively large.
The swimming pool height is more shallow,
Its relative heat absorption area is relatively large,
Therefore, the shallower the swimming pool, the higher the water temperature, and a pool chiller is needed to cool the swimming pool.
If you are plagued with hot swimming pool water, it is time to invest in a pool chiller. If you are new to this, you might have a few questions about how a pool water chiller works and how you can invest in the right one. This guide is what you need to help make that decision. Below is a list of frequently asked questions about water chiller for the pool so you can make the best buying decision.
Constant Temperature Swimming Pool Heat Pump
What Is A Swimming Pool Chiller?
A swimming pool chiller is, as the name suggests, equipment that is designed to help maintain the temperature of the water in your swimming pool so that it is cool enough to swim in. There are many factors that can contribute to the increase of water temperature in a pool, which makes it undesirable for swimming.
You want to keep your swimming pool water cool and refreshing, especially if you use it during the summer months. The swimming pool water chiller works by pulling out the excess heat from the water so that you can enjoy the coldness of the water instead. A swimming pool chiller is available either as a standalone unit or part of an extensive chiller system. There are also models that can double as heater, which is ideal for the winter months.
The primary factor to consider when determining what type of system to use is the size requirements and the usage. For residential pools, a standalone unit will do. But if you are looking to maintain the water for a commercial facility, such as in hotels and resorts, then you might want to invest in a large chiller system.
Needless to say, a swimming pool chiller is a good investment and there are plenty to choose from according to your needs and budget.
How Does A Swimming Pool Chiller Work?
As mentioned above, a swimming pool chiller works by removing excess heat from the pool water to keep it cool. Imagine this – you want to cool off on hot summer days and going for a swim in the pool is one such prospect to get refreshed. But when you hit the pool water, it is actually warm and with water temperature rising due to the ambient conditions.
It works by drawing out the water and then cooling it before it is pumped back into the pool. There are several components that make up the swimming pool chiller that facilitates this cooling process. Essentially, heat from the water is transferred to the air so that it can cool by up to ten degrees.
The first step involves the refrigerant entering the compressor before it passes into the condenser coil. This is where the heat transfer happens and the heat is dissipated into the air and converted into a cool liquid. The liquid then goes to the expansion valve to lower the pressure and temperature. It goes to the exchanger evaporator for more heat transfer and for the water temperature to continually be reduced.
The final step involves the gas refrigerant being absorbed back into the compressor. This will repeat the entire cycle all over again to ensure that the water temperature is kept at the constant ideal rate.
Why Should You Use Chiller On Your Pool?
The simple answer is that it makes it easier and more comfortable for your pool to swim in. Without a swimming pool chiller, the water would be too hot. If you want to be refreshed and cooled off when you swim, then a chiller is an essential equipment to have.
Swimming Pool Cooler
What Heat Exchanger does the Swimming Pool Cooler Use?
In order to realize the stable operation.
Use high-efficiency double-pipe heat exchangers, the pool water circuit and the refrigerant circuit are arranged in a countercurrent flow.
Can ensure the supercooling of the outlet refrigerant and improve the system efficiency;
Pass the 5.0MPa pressure test to ensure the safe and stable operation of the heat exchanger.
Spiral coils make the water path unobstructed and convenient for freezing cleaning;
Freezing cleaning can shorten the downtime and avoid the use of chemicals;
The gap between the refrigerant circuit and the shell is small, which will not cause lubricating oil to stay, and the oil return is smooth;
The water path coil No internal joints, reducing the probability of leakage.
Double-pipe Heat Exchangers for Swimming Pool Chiller
How Much Difference Does A Swimming Pool Chiller Make?
A pool chiller is designed for this specific purpose – to lower the water temperature and achieve the ideal swimming conditions. You can experience a range of 7 to 9 degrees difference in the temperature when you use a chiller. During hot summer days, this would be a significant difference and can impact your experience of using the pool.
The actual temperature change will vary based on a number of factors. However, you can use the above figure as a gauge so you know how effective a chiller unit is in lowering the water temperature in the pool.
Maintaining Temperature of Swimming Pool
Do You Still Need Swimming Pool Chiller Even With Automatic Pool Covers?
An automatic pool cover is a handy feature because it functions as a solar cover. It also helps to extend your use of the swimming pool for early in the spring or up to late summer. But the use of automatic pool covers can actually contribute to making the water warmer during the summer days.
For this reason, investing in a swimming pool chiller is recommended. The use of automatic pool covers does not help to eliminate heat; rather, it traps the heat into the water. A chiller is better designed to effectively remove heat from the water to make it cooler.
Is A Pool Chiller Energy-Efficient?
Yes. A swimming pool chiller is incredibly energy efficient. Compared to a heater or other methods of keeping the swimming pool cool, it uses less energy. The compressor, fan, and water pump are the only parts of the chiller unit that utilizes energy. For every 1 KW of energy it consumes, the chiller can deliver up to 4KW of low-temperature cooling output.
What Are The Components Of A Swimming Pool Chiller?
The components of a swimming pool chiller are not much different from the components of other chiller systems. It is composed of a fan, expansion valve, condenser coil, heat exchanger, and compressor.
Swimming Pool Chiller Diagram
What Is The Ideal Temperature For A Swimming Pool?
The ideal water temperature for a swimming pool is a bit difficult to pinpoint since this could be a matter of personal preference. However, anywhere from 25 to 27 degrees Celsius would be suitable for swimming, especially during the hot summer months. This temperature can be adjusted accordingly based on where you live – since some areas have hotter summers than others.
Regardless of the ambient temperature, the use of a swimming pool chiller will be able to adjust the temperature of the water so that it can dissipate any excess heat.
Is A Swimming Pool Chiller Worth It?
If you use your swimming pool a lot, then it makes sense to invest in a water chiller for the pool. During summer, the heat from the ambient air and the high humidity level can make swimming pools uncomfortably hot. If you live in an area that experiences extremely hot summers, then it is a worthy investment so you can keep your pool water cool.
Swimming Pool Heater
When Does It Make Sense To Install A Swimming Pool Chiller?
The installation of a swimming pool chiller delivers the utmost benefits when you spend most of your time using the pool. It is an energy-efficient solution to maintaining the ideal pool water temperature. The unit is not too big so they are easy to install and use. It can also maintain its performance despite such factors such as heat and humidity.
Since the pool itself is a big investment, you want to maximize the value of that investment by being able to use it more often.
What Are The Benefits Of A Swimming Pool Chiller?
There are numerous benefits that you can get from installing a swimming pool chiller. First and foremost, it follows a straightforward process of a repeating cycle of dissipating excess heat from the water. This will guarantee that you can enjoy the ideal water temperature at any time you want to go for a swim. The average temperature drop in the water ranges from 5 to 10 degrees Celsius.
The cool water in the pool also means that you can feel refreshed when you go for a swim. No matter where you live, nothing beats the joy of swimming in cool pool water to make it an enjoyable and refreshing experience.
Keeping the temperature of the water cool with a swimming pool chiller can also discourage algae growth. Algae thrive in warm water so you can keep their growth in check by maintaining a low water temperature.
The ability to slow down the evaporation process is another benefit you can enjoy for installing a swimming pool chiller. When you slow down the evaporation process, you end up conserving water. Not only are you able to conserve water but you can also save time from having to clean up the water deposits on your swimming pool tile. Thus, investing in a chiller is also practical and not just for your convenience.
What Are Other Ways To Keep Your Swimming Pool Cool?
Before you install a swimming pool chiller, you can also try other methods of lowering the water temperature in the pool. Installing fountains, waterfalls, and other water installations are one way to do that. The constant flow of water facilitates in the transfer of air and accelerates the evaporation rate. This process ensures that the hot water does not remain stagnant and you get a consistent flow of cool water in the pool.
Attempting to remove direct exposure to sunlight is another technique that you can try to keep your swimming pool water cool. When the water is directly exposed to the sun, it can cause the water temperature to rise. You can try growing trees and shrubs near the pool area to keep the sun off. You can also try to install a pool cover so that you can avoid direct exposure to the sun.
You can also try the drain and re-fill technique in order to keep the swimming pool water cool. The process of draining and re-filling your pool is expensive, though. Use this only as a last resort.
If you want a long-term solution, though, installing a swimming pool chiller is a wise investment.
Our Swimming Pool Chillers Effective?
Yes. The pool cooling system is an effective way to lower the temperature of the pool water. This explains why they are becoming more common in residential and commercial pools. As long as it is installed by an expert technician and cared for on a regular basis, you can expect the chiller system to do its job in keeping the temperature of the water constantly cool.
Where Is Swimming Pool Chiller Used?
There are a wide range of applications for a swimming pool chiller. The most common would be for domestic or residential use. The system is ideal for homes and residential buildings with low cooling requirement on their swimming pool.
You can also use a pool water cooler for large-scale and commercial applications, such as hotels, spas, resorts, and other facilities in the hospitality industry. The swimming pool chiller will ensure that the ideal temperature is achieved with the swimming pool to provide a desirable experience for guests.
How Much Does A Swimming Pool Chiller Cost?
The cost of installing a swimming pool chiller will vary based on your location, the size of the unit, and the cooling requirement. It is important to shop around various manufacturers for the best swimming pool chillers so that you can get a clear idea of how much they cost. Once you have the quotes from various manufacturers, you can choose based on your budget and needs.
The swimming pool heat pump is high-tech in the field of thermal energy applications in the world.
It is a device that uses electric energy to drive heat to transfer heat from a low-temperature heat source to a high-temperature heat source.
According to the principle of inverse Carnot cycle, using very little electric energy to drive, the heat source of air above minus 15 degrees in the air is transferred to the air generator through the endothermic working medium, and the heat generated by the gasification of the refrigerant in the air exchanger is released.
Into the water, causing the water temperature to rise.
The swimming pool heat pump is a new type of high-efficiency energy-saving constant temperature heating equipment.
Its working principle is similar to that of an air conditioner. It uses a small amount of electric energy to drive the compressor according to the principle of the reversed Carnot cycle.
Why Choose The Best Swimming Pool Chiller Cooler From GESON?
The high-pressure liquid working medium passes through the expansion valve and then enters the evaporator.
The internal evaporation becomes a gaseous state and absorbs a large amount of heat energy in the air.
The gaseous working fluid is compressed by the compressor into a high-temperature, high-pressure liquid state, and then enters the condenser to release heat to heat the water. Such a continuous heating cycle can heat the water to 50°C-65°C.
During the operation, one part of the energy is consumed (750 watts per horse, which is only equivalent to the electricity consumption of a household electric rice cooker), and four parts of energy (heat) are absorbed and transferred from the ambient air to the water Compared with electric water heaters, it saves three-quarters of electricity.
Swimming Pool Design
What Is The Benefits of GESON Swimming Pool Chiller Cooler?
It integrates dehumidification, cooling, reheating, fresh air and constant temperature of pool water in the pool.
- Environmental protection and energy saving
It only needs to consume a small amount of electric energy to provide circulating power, which has the advantages of low operating costs and zero pollution emissions.
- Intelligent management
Using a microcomputer controller, fully automatic control operation, connected with the building control system to achieve automatic remote control.
- Healthy and comfortable
Reasonably control the dynamic balance of temperature and humidity in the indoor environment to ensure a clean and comfortable swimming pool.
GESON swimming pool heat pump unit is a new type of energy-saving equipment that integrates dehumidification, cooling, reheating, fresh air and constant temperature of the pool water. It can be widely used in swimming pools in hotels, clubs, communities, and stadiums.
Water Chiller for Pool
If you have a swimming pool, you might have considered getting a swimming pool chiller.
This system is designed to cool the water when it gets too warm. There are also swimming pool heater chiller in the market that can do cooling and heating.
It is possible to get one or both of these functions – it will depend on your intended use.
You have no shortage of options if you want to know how to chill a swimming pool. They will vary based on brand, manufacturing specifications, maintenance, and the cost.
To help you sort out your options based on your needs and the unique conditions of your pool, here is a list of common questions asked when choosing swimming pool chiller.
Swimming Pool filter system and HVAC unit
Does A Swimming Pool Chiller Work?
Yes. The use of a swimming pool chiller is effective in regulating the water temperature in the pool.
The use of a pool chiller is not just limited to that, however. It is also recommended to maintain the water’s chemical levels to keep it safe for swimming.
This is why it is necessary to invest in the best pool chiller to make the most of the investment.
What Is The Cost Of Running A Swimming Pool Chiller?
The cost of operation is one of the areas to consider when you decide to install a pool water chiller. The pool chiller cost of maintenance will depend on numerous factors.
The run time is one of the primary factors to consider. The cost of operation will, therefore, vary when it is a private pool or one that is publicly accessed (for commercial purposes).
The approximate power rating of the swimming pool chiller and efficiency of the system are also crucial determiners of operational cost.
If you wish to keep the cost of running a swimming pool chiller low, you have to keep these factors in mind.
Under Swimming Pool Water Plumbing Fittings Utilities
How Do You Keep Pool Water Cool During Summer?
Maintaining a low water temperature is one of the primary benefits that you can get from the installation of swimming pool chiller.
The use of water chiller for pool is one of the most effective ways to regulate water temperature and keep it cool. It acts as an air conditioning unit for your swimming pool.
A swimming pool water chiller uses fans in order to cool the water that navigates throughout the system. This is best when operated at night because the temperature of the water is innately cooler.
The best swimming pool chiller is capable of lowering the water temperature by up to 10 degrees Celsius.
Heat Pump System Construction
How Can Swimming Pool Chiller Keep Water Safe?
Aside from lowering the temperature of the water, swimming pool chiller systems can also reduce chemical consumption.
If the water is kept cool, there is less chance for bacteria to thrive in the water. As a result, the installation of a swimming pool chiller can also require the use of fewer chemicals.
The use of fewer amounts of chemicals is beneficial to the health of the swimmers while also being less expensive to maintain and operate.
Pool pump and filtering equipment for maintaining a clean swimming pool
Can You Use Dry Ice Instead Of Swimming Pool Chiller?
The use of dry ice as replacement for a swimming pool chiller to lower the water temperature seems to be a practical and cost-efficient alternative.
However, dry ice is not as effective as the best swimming pool chillers in terms of keeping the water cool.
In particular, dry ice transforms into gas when it comes into contact with water. Once the gas dissipates, it only cools the water for a short amount of time.
This will require you to add dry ice often in order to retain the cool water on your swimming pool.
On the other hand, the installation of swimming pool cooler will help to regulate water temperature at an interval.
You won’t need to keep working on the water to achieve the ideal temperature. The swimming pool chiller system will do the work for you.
Figure 2 – Swimming Pool Chiller
How About Using A Pool Cover?
Just like using dry ice, a pool cover will only provide temporary solution in terms of lowering your pool’s water temperature.
The installation of a swimming pool chiller is still your best option.
A pool cover works by preventing your pool water from getting too warm, especially in the middle of the day during summer.
The use of a pool cover won’t be able to actually lower the temperature of the water just like a pool water cooler does.
Swimming Pool Cover
What Causes Swimming Pool Water To Warm Up Quickly?
There are several factors that contribute to increasing the temperature on the swimming pool water.
The depth of the pool water is one factor. The shallower the pool is, the quicker it will become warm.
Your swimming pool location is also another critical factor. When the pool is in direct exposure to sunlight, then it will increase in water temperature rather quickly.
It is recommended that you install pool water cooler. A swimming pool chiller will help to regulate the water temperature in the pool.
Whatever the cause of the water heating up fast, the pool cooler can keep it cool enough to swim in (even during summer months).
Heat Pump Heater for Indoor Lap Swimming Pool
What Is The Most Efficient Way To Heat A Swimming Pool?
Installing a swimming pool heat pump with chiller is one of the most energy-efficient ways to increase the temperature of the water.
Make sure to check swimming pool chiller reviews to find the most efficient system. It is also best to do a thorough comparison of the swimming pool chiller price in the market.
When Should I Heat My Pool?
While many are curious how to chill a swimming pool, there are also some that want a heated pool.
Buying a swimming pool heater and chiller is very common these days. Almost every pool owner invests in one.
There are numerous benefits for swimming in a heated pool. First off, it is notable for its therapeutic benefits.
Swimming in heated pool water can also relax your muscles and your entire body. The ideal temperature for therapeutic effects is no more than 25 degrees Celsius.
Can You Get A Swimming Pool Chiller Without A Heater?
A heat pump for the swimming pool without chiller is pretty common. You can also find swimming pool chiller systems that do not have heater included in it.
When doing your comparison of swimming pool heater and chiller, always take this into account.
There are several manufacturers that can provide you with standalone swimming pool chiller if you do not need a heater.
In fact, you can also find manufacturers of portable swimming pool chiller, if that is what you prefer.
How Much Does A Swimming Pool Chiller Cost?
The swimming pool chiller cost will vary depending on which supplier you get it from and the specific type of system.
Obviously, the cost of swimming pool heater and chiller will be different than if you were to buy the chiller system alone.
The size of the pool is another factor that will determine the swimming pool chiller cost.
The average cost of standalone swimming pool chiller systems start at $2,500 and can go up to $3,500.
You can also find swimming pool heat pump with chiller that range from $6,000 to $6,500 in price.
Different manufacturers and brands will price their products differently. Always include price when researching swimming pool water chiller reviews.
Is A Swimming Pool Chiller Worth It?
A swimming pool chiller is one of your best investments if you have a pool. There are plenty of benefits that you can get when installing this system.
The first and most obvious benefit of a swimming pool water chiller is that it can help to cool down your pool’s water temperature.
Achieving the ideal coolness of the water temperature can make it more suitable for swimming, especially in the summer.
The use of a swimming pool cooler can also save you tons of money in the long run. You will require fewer amounts of chemical to keep it safe to swim in.
With cooler water temperature and improved circulation within the system, there is lesser likelihood that algae will form in the pool water.
Installing a swimming pool water chiller is not just worth it; it is necessary.
How Long Will A Swimming Pool Chiller Last?
The average lifespan of water chiller for pool is 10 to 20 years. It will vary from one brand to another.
The frequency of use and the maintenance that you put into the system will also determine how long the pool water chiller will last.
Even the best swimming pool chillers will require regular maintenance to retain optimal working condition.
Do You Need Swimming Pool Chiller For Dark Bottom Pools?
It depends. The effect of a dark bottom pool can be compared to a black car on a hot sunny day.
The dark paint is more likely to absorb heat from the sun. It is the perfect scenario if you wish to keep your pool water warm.
If you wish to cool the water temperature, you need the best pool chiller for the job.
The best swimming pool chillers are a good investment so that the water remains ideal to swim in, even if the land temperature is higher.
Who Else Needs To Install Swimming Pool Chiller?
Installing a swimming pool chiller is recommended for those who live in cities or areas that have hotter climates.
The natural climate can affect the temperature of the water. With the help of a swimming pool water chiller, the water remains ideal to swim in.
Here are a few more reasons why you might need to install a pool water cooler:
- Your pool is located in a warm climate area.
- Your pool has a dark bottom.
- Your pool is shallow.
- Your pool comes with tile or pebble finish.
Above Ground Pool Chiller
When Do You Install A Swimming Pool Chiller?
A swimming pool water chiller can be installed any time you need it.
Fortunately, you do not need to install it alongside the construction of the pool itself. You can install it later when you desire or when you have the budget for it.
If you decide to install a heat pump, it is a must to install the water chiller for pool with it. Otherwise, you won’t be able to install the pool chiller after the heat pump is installed.
How Can You Save Money With Swimming Pool Chiller?
The right system of swimming pool heat pump with chiller can save you money in the long run. It helps to regulate the water temperature and save the energy required to maintain that temperature.
It can also save water in the long run because you can keep algae away, along with harmful bacteria. You won’t need to replace your pool water as frequently with swimming pool heater and chiller.
Finally, you can save the environment. You won’t need to spend an unnecessary amount of money on chemicals to keep the water safe.
What Features To Look For In Swimming Pool Chiller?
There are several models of swimming pool chiller in the market. If you are looking for the best swimming pool chillers, check out the list of features.
Easy to control settings is an important feature to look it. You want to be able to adjust the settings with ease.
Choose a swimming pool chiller that does not work on evaporation so you can help in conserving water.
Look into the material of the heat exchanger. Make sure that it is not prone to damage when exposed to hard water chemicals.
It is also best to consider the size and cost of the swimming pool cooler. These factors must be chosen in relation to the size of your swimming pool.
By considering the above factors, you will be able to select the ideal swimming pool chiller so you can enjoy your oasis to the maximum level.
If you are not sure about what to choose for your pool, don’t hesitate to get in touch with us. We will be more than happy to assist you in finding the right system for you.
What are the disadvantages of the traditional dehumidification and constant temperature method for swimming pools?
The traditional method of aging and maintaining constant temperature is backward, and the operating cost is high:
The method of dehumidification has always been to increase the number of ventilation,
Add a lot of fresh air to improve the air quality in the swimming pool.
But a lot of ventilation takes away not only a lot of water vapor,
It also takes away a lot of heat energy contained in the water vapor.
The swimming pool is a place with high energy consumption, and the operating cost is very important.
The energy consumption of swimming pool water treatment and swimming pool constant temperature and humidity is too high.
More than 90% of the energy loss in the swimming pool is caused by evaporation.
Most of this energy is stored in the pool air in the form of water vapor (latent heat).
If traditional ventilation and dehumidification are used,
Generally, the exhaust air volume is 3 times the indoor volume of the swimming pool per hour.
This will cause a lot of heat loss in the swimming pool in winter.
In summer, it will cause a large loss of cooling capacity in the swimming pool.
In order to supplement the energy lost in the swimming pool,
In the traditional ventilation and dehumidification method, the swimming pool has to use boilers, central air conditioners, etc. to provide a large amount of heat or cold sources to supplement energy in the swimming pool.
Consume a lot of energy costs.
Classification of swimming pools
1. The swimming pool is divided by purpose
Can be divided into stadium swimming pool and leisure swimming pool;
1. Competition field swimming pool: It is a more formal swimming pool for the competition field.
Such as the standard pool and diving pool in the Olympic stadium or the Asian Games stadium,
Specifications, water depth, circulation method, circulation period, disinfection method, water quality requirements, etc. must all be standardized internationally;
The design level is higher;
2. Leisure swimming pool: non-competition swimming pool.
Such as hotel facilities, community facilities, swimming pools, private villa swimming pools, swimming pools in clubs, etc.;
The design of the leisure swimming pool is more casual, and it can be designed according to the investor’s wishes.
The shape of the leisure pool is also more random;
2. Swimming pools are classified according to the water temperature design requirements, which can be divided into constant temperature swimming pools and non-heated swimming pools;
Constant temperature swimming pool design:
1. Constant-temperature swimming pools are usually indoor pools, and the constant temperature of outdoor pools is relatively rare;
2. Heating method of constant temperature swimming pool.
Commonly used heat media are:
Electricity, gas, diesel, solar energy, hot water, steam, coal.
2.1. Electric heating:
Electric heating is usually through electrical equipment,
Such as constant temperature furnace, air source heat pump, etc.
The constant temperature furnace is directly heated by heating wire. The constant temperature furnace equipment is relatively cheap, but it uses a lot of electricity. If a standard pool is 2250 tons of water,
To heat the water from 10 degrees to 27 degrees,
The electricity bill was tens of thousands of yuan in the first two days,
After that, the daily constant temperature electricity bill will be nearly 1,000 yuan,
For the constant temperature of the swimming pool, it is unrealistic to use a constant temperature stove;
The swimming pool heat pump heating actually uses electricity.
But the operating cost of a swimming pool heat pump is only half of that of an electric thermostat.
Because the working principle of the heat pump is not directly heated by electric heating wire,
It uses a compressor to circulate the refrigerant to achieve a physical change to obtain heat energy.
Everyone knows that when a liquid becomes a gas, it needs to absorb heat energy in the air When gas is compressed into liquid, heat energy is also generated,
The heat pump uses these two physical principles,
Turn the low-pressure and low-heat gaseous refrigerant into a high-pressure and high-temperature liquid state,
Then through a reverse process to release the heat energy,
Passed to the pool water,
The swimming pool chiller and swimming pool heat pump circulate in this way to achieve heating.
At present, the use of heat pump constant temperature swimming pool in the south is the most economical and most cost-effective.
But the first investment of equipment is also the most expensive;
2.2. Heating with oil or natural gas,
This method is more suitable for places where oil or gas is cheaper.
Natural gas is also quite cost-effective,
Not only is the poos chiller cost cheaper,
It is also more affordable to operate,
The downside is that it pollutes the environment;
2.3. Heating with coal,
It is also necessary to use coal-fired boilers to produce hot water or steam,
The heat energy of hot water or steam is transferred to the swimming pool water through the heat exchanger,
The input of coal stove is not expensive, and it is not expensive to use.
The disadvantages are: large heat energy loss, environmental pollution, difficult to control, constant fuel addition,
There must be someone to add coal,
Coal burning cannot be turned on or off at any time,
Not as convenient as electricity;
2.4. Solar heating:
Pure solar heating is only suitable for small swimming pools (several cubic meters),
Dozens of cubic meters of swimming pool,
All must be equipped with swimming pool heat pump or thermostat.
2.5, steam or hot water,
Use hot springs or geothermal heat or industrial waste heat,
Heat the water in the swimming pool through a heat exchanger;
3. according to the circulation method to divide,
Swimming pools can be divided into co-current, counter-current, mixed-flow, and machine-room-less methods
1. Downstream: Take water from the bottom of the pool to filter in the machine room, and then return the water to the pool.
The characteristics are: static,
You basically don’t feel the water filtering,
The water surface is also static,
If there are bubbles on the water,
Does not clear the salvage,
The bubble will always be on the water;
2. The counter-flow type means that the pool water flows out of the pool from the water surface through the overflow and is collected and returned to the computer room for filtration.
And then back to the pool,
The characteristics of this method are: moving, water is dynamic,
It is difficult for impurities to stay on the water surface,
The water quality is quite clean from the sensory point of view;
3. Mixed flow is a combination of the two,
The Olympic swimming pool is a mixed-flow type,
Usually the swimming pool is not simply designed as a counter-flow type
It will be designed as a mixed flow type;
4. Room-less type, that is, integrated swimming pool filter,
That is, the integrated swimming pool equipment,
It is very suitable for small swimming pools, private swimming pools, outdoor community swimming pools and other places.
Just hang the swimming pool chiller and pool equipment on the pool wall or install the equipment pit beside the pool,
No computer room, no pipes,
No need for professional skills, no water distributor,
The overall investment for swimming pool and pool chiller cost is much lower than that of the computer room.
Especially the small swimming pool,
Two or three sets are enough, suppose
The equipment itself has lights, escalators, massage nozzles, filtration and disinfection in one, and the water quality is guaranteed.