How Many Types of Chiller

Types of Chiller System

The Complete Guide to Types of Chiller Systems | GESON CHILLER

What is the Different Types of Chiller Systems and How They Work?

Chiller is a cooling system that can be used in various industries. This is a machine that provides cold air to the environment and it is usually used in the food industry. The chiller system can be classified into two types namely, air-cooled and water-cooled.

Air-cooled systems are cheaper than water-cooled systems as they do not need expensive water pumps or condensers. However, they require more space for installation and maintenance. On the other hand, water-cooled systems are more expensive but they have a number of advantages such as reliability, low noise levels and lower energy consumption.

Types of Chiller Systems and How to Choose the Best System for Your Business

Air cooled chillers are the most common type of chiller. They use a lot of energy and have to be replaced every few years. However, they are cheaper than water cooled chillers.

Water cooled chillers are less common because they require more maintenance and installation costs. They can last up to 20 years, but can cost up to six times as much as air cooled chillers.

What are the two main types of chillers?

There are two main types of chillers: air-cooled and water-cooled. Air-cooled chillers use air to cool the condenser coil, while water-cooled chillers use a liquid to cool the condenser coil.

Air-Cooled Chiller: Air is used to cool the condenser coil in an air-cooled chiller. The compressor pumps refrigerant through a series of coils that are cooled by either ambient air or by cooling oil sprayed on them. The refrigerant vaporizes and absorbs heat from the room and turns back into liquid, which then goes back through the coils and is compressed again before being sent out for another cycle. This process continues until all of the heat is removed from the refrigerant, at which point it becomes liquid again and can be cooled with an external source such as ambient air or a cooling tower.

Water-Cooled Chiller: Water is used to cool the condenser coil in a

What are the 4 main components of a chiller system?

The four main components of a chiller system are:


-Expansion valve

-Reciprocating compressor

-Fan coil unit

How many types of AC and chiller are there?

Air conditioners and chillers are two types of cooling systems that have been used for decades. The main difference between the two is that air conditioners are designed to cool a room or a building, while chillers are designed to cool a specific area like an industrial plant.

Air Conditioner: Air conditioning units, also known as AC units, have been around since the late 1800s. They work by pulling in hot air from inside the room or building and releasing it outside through vents. The process creates cold air which is then circulated through the room or building.

Chiller: Chillers receive heat from an external source and use this heat to produce cold water which is circulated through pipes to various points in the plant where it is needed to keep things cool as they work.

Advantages and Disadvantages of Each Type of Chiller System

The compressor cooling system is the most common type of chiller system. It is the most cost-effective and efficient cooling system for most applications. Compressor cooling systems are not as effective in extremely cold environments and they can be noisy.

The air-cooled chiller uses a fan to blow air over a heat exchanger to cool the refrigerant gas. Air cooled chillers can be quieter than compressor chillers, but they are more expensive and less energy efficient than compressor chillers.

The evaporative chiller is an air-cooled chiller that uses water to reduce the temperature of refrigerant gas by evaporation. Evaporative chillers are not as effective in hot and humid climates, but they can be used in dry climates with lower relative humidity levels. Evaporative chillers also have a lower operating cost than other types of chiller systems, but they are more expensive to install and maintain than other types of chiller systems.

Geson products line includes the following:

GESON Chiller Can Meet Your Needs.

Contact us today for industrial cooling solutions that will suit your needs and budget!

GESON Industrial Chiller

  • 50~400ton cooling capacity
  • -5℃ chilled water temperature supply
  • Loading adjusted 100%, 75%, 50%, 25%,0
  • Branded screw compressors, simple structure, few breakdowns

500Tons Inverter Direct-drive Centrifugal Chiller

  • Cooling capacity: 250~1300RT / 879~4571kW
  • Refrigeration COP: 6.33~6.62
  • Refrigeration IPLV: 8.10~9.07
  • Energy Efficiency Level: Level 1

Chiller Size Calculator

1 m³=264.17 Gallon=1000 Litre

Max: 40℃

Min: 5℃, lower than this, please email us for advise.

1 Ton = 3.517 kw, 1kw = 0.2843 Ton

2023-07-13T13:14:10+00:00Introduction to Water Chillers, Uncategorized|Comments Off on Types of Chiller System